REACTIVATOR OF BENTONITE SLURRY
(hydrocyclone desander)
Hydrocyclone desander ��-4 is intended for sand sifting from bentonite slurry used at drilling work.
After cleaning in a hydrocyclone desander bentonite slurry should comply with the following parameters:
-
Density 1,10-1,25 g/sm3.
-
Static shear stress SSS1-20-50 mg/��3.
-
Relative viscosity at ���-5 is not more than 30 sec.
- Sand content is not above 4%.
-
Particle content with dimensions of :
- more than 0,05 is not above 10%.
- less than 0,005 is at least 30%.
- less than 0,001 is at least 10%.
The device includes
-
Shaker screen.
-
Pump.
-
Hydrocyclone.
-
Container.
-
Shaker screen control box.
-
Pump control box.
Hydrocyclone desander �ϖ4 is designed as a single transportable block and has the following dimensions: length 3400 mm, width 1734 mm, height 2500 mm.